Specifications; Warranty - Sunrise Medical DeVilbiss 9000 Serie Guide D'instructions

16

SPECIFICATIONS

Technical Specifications
Size .............................................................................4.0"H x 7.5"W x 10.8"D
Weight....................................................................................3.6 lbs. (1.7 kg)
Electrical Requirements (9000/9001) ...................................100-240V~, 50/60 Hz
9001 Only ........................................................................12 VDC @ 3 A max
Maximum Power Consumption ...............................................................65 watts
CPAP Pressure Range .....................................................................3-20 cm H2O
Pressure Delay Time..................................................0, 10, 20, 30 or 45 minutes
Delay Pressure Range .......................................3 cm H2O to prescription pressure
Operating Temperature Range................................41°F to 104°F (+5°C to +40°C)
Operating Humidity Range ....................................5% to 95% RH non-condensing
Operating Atmospheric Conditions .....................................Sea level to 9,000 feet
Storage & Transportation Temperature Range. .........-4°F to 140°F (-20°C to +60°C)
Storage & Transportation Humidity Range................5% to 95% RH non-condensing
Maximum Limited Pressure .................................................................28 cmH2O
Sound Level........................................30 dBA (@ 10 cmH2O, 1 meter from CPAP)
Filter specs ..................................................Standard Filter > 3 micron particles
Max flow rates Model 9000
83 L/m
134 L/m
163 L/m
Pressure Stability
Between maintenance intervals
(maintenance interval = 1 year) Model 9001 = ± 1 cmH2O
Model 9000 Pressure swings (cmH
2
Breaths per minute
@ 7 cmH2O
@ 13 cmH2O
@ 20 cmH2O
SE-900
S p e c i f i c a t i o n s
(10.2 cm x 19.6 cm x 26.2 cm)
Optional Fine Particle Filter > 0.3 micron particles
Model 9001
73 L/m @ 7 cmH2O (1/3 max pressure)
118 L/m @ 13 cmH2O (2/3 max pressure)
164 L/m @ 20 cmH2O (max pressure)
Model 9000 = ± 2 cmH2O
O peak to peak at 500mL tidal volume)
10 15 20
1.0 1.0 1.0
1.0 1.0 1.0
1.3 1.3 1.4
S p e c i f i c a t i o n s
Model 9001 Pressure swings (cmH2O peak to peak at 500mL tidal volume)
Breaths per minute 10
@ 7 cmH2O 1.0
@ 13 cmH2O 1.0
@ 20 cmH2O 1.1
Warranty.................................................................................Two-year limited
Equipment classification with respect to protection from electric shock:.......Class II
Degree of protection from electric shock:...............................Type BF Applied Part
Degree of protection against ingress of liquids:............................................None
Equipment not suitable for use in the presence of a flammable anaesthetic mixture
with air or with oxygen or nitrous oxide.
Mode of operation: ..........................................................................Continuous
Definitions
Display – purpose, type, information displayed. The LCD display shows the following
information in each model:
Model 9000 Model 9001 Description
Set Pres Set Pres CPAP pressure prescribed for the patient in cmH2O
Altitude Altitude setting one of four ranges
Fine Adj Fine adjustment for fine tuning pressure using an
external manometer
Dly Time Dly Time Delay time prescribed for the patient in minutes
Dly Pres Dly Pres Delay pressure prescribed for the patient in cmH2O
Compl Hrs Compl Hrs Compliance meter, shows accumulated time "while
breathing"
Unit Hrs Unit Hrs Unit hour meter, shows accumulated time of blower
operation
Firmware Firmware Firmware version installed in the CPAP
Serial # Serial # Serial number of the CPAP
Language Language Language selection for LCD display messages
Off Off Blower is OFF; AC or DC power is connected
Error Error An error has been detected by the firmware, the
CPAP is in a fail safe mode
17
15 20
1.0 1.1
1.0 1.1
1.1 1.2
SE-900