Vitrifrigo IM CL REFILL Serie Manuel D'installation Et Mode D'emploi page 16

that you know to work
− the power cable is not interrupted.
10.2.THE ICE MAKER IS NOISY
Check that:
EN
− the ice maker is properly level
− the ice maker is not in contact with any units that can cause it to vibrate
− the cooling circuit pipes at the machine rear have no contact points and that
they do not vibrate against the machine.
3- INSUFFICIENT ICE PRODUCTION
Check that:
− the door closure is airtight
− the ice maker is not close to sources of heat
− the ice maker is properly ventilated
− the condenser is not blocked by dust
− the fan can rotate freely
4- THE ICE MAKER DOES NOT PRODUCE ICE
Check that:
− the refrigerating system is operating correctly
− there is water in the grid assembly (J);
− there is sufficient water in the tank or that the water mains is operating
correctly
− the internal temperature of the ICE MAKER is ≤ -15°C
− the ice-level sensor (C) is in the position indicated in Fig. 1
− if water is present in the grid assembly, make sure that the cooling system is
operating correctly (L).
5- THE ICE MAKER DOES NOT EJECT ICE
Check that:
− ice is present in the grid assembly.
− If this is the case, reset the appliance by switching it off for 4-5 hours.
If the machine still does not operate correctly at the end of these checks,
contact the technical assistance service.
16