Publicité
3
Change faceplate, if necessary.
Choose the drawing that matches your door edge. If the hole has no
mortise, change to the circular faceplate.
No change necessary.
4
Install Latch.
Make sure latch angle faces door jamb.
Angle
Actual Size (2)
Interior
Angle
Wood Block (not
included)
5
Install AAA batteries into the alarm interior.
6
Install the exterior lever.
7
Install the Alarm Interior.
Make sure lock is straight before tightening screws.
8
Turn the alarm on.
Press the inside Schlage button for 5 seconds, until any light flashes
around the Schlage button. See the included User's Guide for detailed
instructions.
9
Activate the alarm.
See the included User Guide's for detailed instructions.
Bar should
slide
smoothly
through
hole in
latch. If not,
check door
dimensions.
Actual Size (2)
Publicité
