auna multimedia IR-150 Mode D'emploi page 24

Power Management
This function is to allow the radio to go to Standby if there is no internet signal received in order to save power. The
default setting is 30 minutes. When the radio does not receive any internet signal, the radio will go into Standby after
30 minutes. Other time frame for 5 minutes and 15 minutes are available.
Sleep Timer
You can set the timer to put the radio on standby after certain time elapsed, from 15 minutes to 180 minutes with the
step of every 15 minute.
You also can do the setting with the "Sleep" button from remote control, when you press "Sleep", then you can see the
sleep timer on the top right corner of the display.
Buffer: Select your preferred buffering time.
Weather: Set the display of weather forecast on the standby mode, select your region and the temperature units (°C
/ °F)
FM Setup: Select Stereo or Mono for the FM and select the region of your location.
Local Radio Setup
The radio will detect your local area stations automatically and it will display under the "Internet radio" you will find all
the stations under "Internet radio" -> "Local Radio".
If you would like to change the Local area stations to other countries, you can choose "Manual setup" to make the
change.
Playback Setup: Select REPEAT ONE / REPEAT ALL / SHUFFLE
DLNA Setup
When the MS-60i radio is connected by other DLNA devices, the name of the radio will appear as "AirMusic". This is
the name in default. You can change other name here as you desire.
Equalizer. Select your prefer music effect.
Software update
• Upgrade information will pop up on the display when there is an upgrade version available on the server.
• When there is an upgrade version available on the server, you can do the manual upgrade from the update menu.
Reset to default
You can do this factory reset to empty all of the settings and it comes back to default settings. Please note that all sta-
tion presets, settings and configuration will be lost after performing the factory reset.
Remark: Playing is stopped when it comes back to default settings. The device will skip into the language setting au-
tomatically. After that it will turn to the internet settings.
24