Publicité
Section 23
Install Jumper Harness for Rear Glass
Step 1
510.18
Step 1
Attach Harness to Rear Glass heater grid
terminals and route the wiring back to the
existing OE harness. Use the "P" clips and
screws provided in the harness kit to route
the wires.
P34 - 54852 - Rev. A 0115
Hardware
Jumper Harness
Qty - 1
Part # 510.18
Installation Instructions - Trektop PRO Twill
Step 2
Step 2
Attach Jumper Harness to existing vehicle
wiring harness.
You will need to reuse the original washer
fluid connector for the Trektop PRO
washer fluid tube.
© 2014 Bestop, Inc.
Page 34
Publicité
