Publicité
Section 4
Install Window Carrier Assembly
Step 1
Ratchet
13mm Socket
Step 1
Unzip the upper rear sport bar cover and
locate the upper sport bar bolt. Remove
the two (2) bolts and set them aside to be
reused.
Cut two (2) horizontal slits the same width
as the tabs on the Rear Bracket in the
sport bar cover 1/4" below the zipper and
aligned with the bolt hole
P10 - 54852 - Rev. A 0115
Utility Knife
Installation Instructions - Trektop PRO Twill
Page 10
Ratchet
13mm Socket
Step 2
Use the bolts that were removed to mount
the Window Carrier Assembly to the sport
bar. Zip sport bar cover closed.
Repeat on both sides of the vehicle.
© 2014 Bestop, Inc.
Publicité
