Intellinet Network Solutions 510493 Instructions page 2

Gigabit Ethernet to SFP Media Converter
Thank you for purchasing the Intellinet Gigabit Ethernet
Media Converter. Media converters connect two Ethernet
networks over a longer distance using fiber optic cable.
MODEL
Gigabit Ethernet Multi Mode Media Converter (510493)
10/100/1000Base-TX to 1000Base-SX Multi-
Mode/1000Base-LX Single-Mode (SFP slot, empty)
Media Converter 1
ETHERNET 1
Twisted Pair
COnnECtiOns
Twisted Pair – RJ45
Connect the UTP port of the media converter to an RJ45
port on the network; e.g., to an Ethernet switch. Cat5e or
better cabling is recommended.
SFP Slot
This media converter does not come with integrated fiber
ports, instead it takes an SFP transceiver module (1.25
Gbps), which provides the fiber optic ports. As shown
above, two fiber optic cables need to be connected
between two ideally identical media converters. Make a
connection from Media Converter 1 TX to Media Converter
2
ENGLISH
RJ45
RX
TX
OPTICAL FIBER
TX
RX RJ45
Twisted Pair
ETHERNET 2
Media Converter 2
English