Revell Control Dark Giant Mode D'emploi page 9

THE SuiTABLE DRiViNG ENViRoNMENT:
The location in which the vehicle is driven should fulfill the following criteria:
1. It should be a location in which there is as much open area as possible,
without disruptive obstacles.
2. Make absolutely sure when starting that there are no people or animals
in the immediate vicinity.
3. Always watch the vehicle so that it does not drive into the operator,
other people or animals and injuries them.
TroubleShooTINg
problem: The wheels do not move.
Cause: • The battery is too weak or depleted.
Remedy: • Charge the battery (see chapter "Charging the vehicle").
problem: Remote control does not work.
Cause:
• The remote control is switched off.
• The batteries were not inserted correctly.
• The batteries do not have enough power.
Remedy: • Repeat the switch­on process as described.
• Check whether the batteries are inserted correctly.
problem: The vehicle cannot be controlled with the remote control.
Cause: • The remote control is switched off.
• The connection between the remote control and vehicle has been severed.
Remedy: • Move the remote control switch to the "ON" position.
• Turn the vehicle and the remote control off and on again.
problem: The vehicle slows down and stops during travel for no apparent reason.
Cause: • The vehicle battery is too weak.
Remedy: • Charge the battery (see chapter "Charging the vehicle").
Problem: The power LED on the remote control starts to flash when driving.
Cause: • The remote control's batteries are flat.
Remedy: • Replace or recharge the batteries (see the chapter "Inserting batteries").
Additional tips and trick can be found online at www.revell-control.de.
ServICe guIdelINeS
At www.revell-control.de, you can find our possibilities
to order, replacement tips for spare parts, and further
useful information on all Revell Control models.
16
www.revell-control.de
17