Solving Problems - Vax AirRevolve C85-AC-PH-E Mode D'emploi

CAUTION: Switch off the appliance, unplug it and remove the accessory from the hose or telescopic
tube before performing any maintenance or troubleshooting checks.
Removing blockages from the powered head
Using a crosshead screw-
driver, remove 3 screws from
the side of the floorhead and
remove end cap belt cover.
Lift and remove the top
part of the brushbar side
cover.
IMPORTANT: The powered head has a 5 second delay when the brushbar is halted/jammed.
Turn off and resume power after 5 seconds.
Pull and remove the
brushbar location plate.
Pull brushbar and remove.

Solving problems

Remove the belt.
Use scissors to remove any
blockages before replacing
back into the machine.
GB
33