Product Description; Dimensional Drawings [Mm]; Approvals And Markings; Design And Function - DOLD J Traduction De La Notice Originale

Safety Technique
SAFEMASTER STS
Safety switch- and key interlock system
Actuator J
Presentation: Coding level „Low"; without mounting bracket

Product Description

The self-adjusting actuator J is used in connection with the SAFEMASTER
STS units which are equipped with integrated actuator modules A, B, D,
E or K. Generally, it is fitted to the movable part of a separating guard
and is used to switch the associated STS unit.

Dimensional Drawings [mm]

29,8
30
M4265_b
33
All technical data in this list relate to the state at the moment of edition. We reserve the right for
technical improvements and changes at any time.
82,9
33
STS-System Benefits
• EU-Test certificate according to the directive 2006/42/EG, annex IX
• For safety applications up to PLe/Cat. 4 according to DIN EN/ISO 13849-1
• Modular and expandable system
• Rugged stainless steel design
• Wireless mechanical safeguarding
• Combines the benefits of safety switch, locking module and
key transfer in a single system
• Easy installation through comprehensive accessories
• Protection against lock-in
• Coding level low, medium, high according to DIN EN ISO 14119:2014-03
Features
• Actuator with 4 degrees of flexibility
• Mounting bracket included
• Retains its last position
• Can be coded
• Self-adjusting
• Simple manual setting
• Manual adjustment of vertical offset during operation up to 16 mm

Approvals and Markings

Design and Function

The self-adjusting actuator J is suitable for difficult applications where
actuator C or a sliding bolt cannot be used.
In addition to the self-adjustment the actuator J has the added
advantage, compared to the actuator C, that it retains its last position
when removed from the actuator module. By contrast, the actuator C
springs back to its set position.
4 mounting holes are provided for fastening the actuator J. An installation
bracket is included in the scope of delivery especially for applications
with sliding doors.
Notes
Attention!
!
Actuator J may not be used if there is a risk of overoading
the associated STS unit through possible use of force!
Such an example is a manually operated sliding door, the protection of
which is achieved by an STS unit with a key module above the actuator
module, for instance, SXB01M. If the door is closed here by force while the
key is still removed, the actuator module B remains blocked. It may therefore
sustain mechanical damage when slamming the door shut with force.

Technical Data

Material
Actuator:
7
SAFEMASTER STS Actuator STS-J / 03.07.20 en / 258A
C US
Stainless steel V4A / AISI 316