Chauvin Arnoux MH 60 Notice De Fonctionnement page 18

Thank you for purchasing this oscilloscope clamp.
For best results from your instrument:
 read these operating instructions carefully,
 comply with the precautions for use.
Meaning of the symbols:
Attention! Refer to the operating instructions before using the instrument. Those preceded
by this symbol, if omitted or not correctly performed, may cause bodily injury or damage the
instrument and the installations.
In the European Union, this product is subject to selective collection and recycling at end-of-
life as waste electric and electronic equipment under directive 2002/96/EC (WEEE): this
equipment must not be treated as an ordinary household waste. The spent batteries must
not be treated as household wastes. Take them to the appropriate collection point for
recycling.
This product or this packaging can be recycled.
Instrument entirely protected by double insulation or reinforced insulation
Can be applied to or removed from conductors at dangerous voltages
Earth
Device for DC and AC
 Do not expose the clamp to running water or spattering.
 Do not use the clamp on uninsulated conductors at a potential exceeding 600V with respect to
earth.
 Do not use the clamp on conductors of which the temperature >90°C.
 For DC measurements, make sure of the zero of the output. Adjust it if necessary.
 During the measurement, make sure that the conductor is correctly aligned with the marks on the
jaws and that the clamp is correctly closed.
If the conductors are not insulated, it may be necessary to wear PPE (Personal Protective
Equipment)
 The MH60 oscilloscope clamp includes a NiMH storage battery that must be recharged before any
prolonged storage.
Except as otherwise stated, our warranty is valid for twelve months starting from the date on
which the equipment was sold (extract from our General Conditions of Sale provided on request).
PRECAUTIONS FOR USE
WARRANTY
16
Oscilloscope clamp