Rexel ClassicCut CL100 Manuel D'utilisation page 5

Operating the guillotine
Place the guillotine on a stable, flat surface such
1
as a table.
Lift cutting arm into cutting position.
2
E. Ensure the safety guard is installed. With the
3
left hand, hold the material securely in place to
be sure that it remains square to the blade while
cutting.
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry guillotine by holding on to the cutting
blade handle.
• Always operate guillotine with both hands and on a
stable base or desk.
• Check the fittings of the blade and safety cutting rail
from time to time.
Guarantee
Operation of this machine is guaranteed for two
years from date of purchase, subject to normal
use. Within the guarantee period, Rexel will at its
own discretion either repair or replace the defective
machine free of charge. Defects due to misuse or
use for inappropriate purposes are not covered
under the guarantee. Proof of date of purchase will
Register this product online at www.rexeleurope.com
Use Grid and ruler to ensure a precise cut.
4
When finished using the guillotine, always place
5
the cutting arm in the down position and secure
the handle safety latch.
Service
Do not attempt to service or repair the safety guard,
retaining bracket/screw, blade arm, or any other part
of the unit yourself. If your guillotine is under warranty
return it to the point of purchase for replacement or
repair. If your guillotine is no longer under the point
of purchase return period and requires replacement
or repair, please contact your supplier for further
assistance.
be required. Repairs or alterations made by persons
not authorised by Rexel will invalidate the guarantee.
It is our aim to ensure that our products perform to
the specifications stated. This guarantee does not
affect the legal rights which consumers have under
applicable national legislation governing the sale of
goods.
G
5