Setting The Time; Setting The Date - Marathon Arctic Edition Medium Diver's Automatic Mode D'emploi

INSTRUCTIONS
* If your watch has stopped, you may wind the crown clockwise while in position 2.
Turn the crown six to ten full turns to restart the movement. Then set the time by pulling
out the crown to position 4. Once the watch is set onto one's wrist, it will automatically
self-wind by the normal motion of the wrist. When winding the movement manually,
be sure to turn the crown gently clockwise. Turning the crown too fast may cause
damage to the winding gear.

SETTING THE DATE

1. Unscrew the crown from position 1 to position 3.
2. Turn the crown clockwise to change the date.**
3. Pull the crown out to position 4 to adjust the time so that the date changes at midnight
and not at mid-day (12 noon).
** We recommend that when setting the date, start by using yesterday's date to make
sure that the watch gets set to the proper morning (AM) or afternoon (PM) time period.
For example, if the present time is the 18th at 17:00, set the date to the 17th; then pull
out the crown to position 4 and move the time forward until it reaches the 18th at 17:00.
CAUTION: 1. Crown must be screwed in completely to ensure that the watch is water-
resistant. Do not attempt to set the date if the hands are positioned between 20:00
hours and 01:00 hours. Adjusting the date in this position will cause damage to the
date mechanism and void the warranty. 2. Use only officially certified service centers for
servicing this watch, otherwise the warranty is void. 3. The watch is a precision instrument
and should not be subjected to extreme impact or kept for prolonged periods near
magnetic fields, such as induction cooktops, handbags with magnets and speakers. These
could potentially cause the watch to perform poorly or stop.
3 4
1 2
NOTE: When the crown is in position 4, the second hand stops so
that the time can be synchronized with an accurate time source.

SETTING THE TIME

1. Unscrew the crown from position 1
to position 2.*
2. Pull the crown out to position 4.
3. Turn the crown clockwise or counter
clockwise to adjust the time.
ENGLISH