Emerson InSinkErator TranScape HC-View-SS Guide D'utilisation Et Soins De Propriètaire page 6

2
INSTALLING THE FAUCET - VIEW/ WAVE
A
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
B
1
5 ⁄ " Small
8
Steel Washer
1
5 ⁄ " Small
8
Rubber Washer
1
Standard 1 ⁄ " hole
2
Faucet is factory-ready for installation
into a standard 1
C
Fiber
Washer
An assistant may be needed to hold
the dispenser head in place
while securing the dispenser.
Figure 1
If sink/counter thickness exceeds 3/4"
a hole diameter of 1
6
1
5 ⁄ " Small
8
Steel Washer
1 5 ⁄ " Small
8
Rubber Washer
2
1 ⁄ " Large
4
Steel Washer
Hole larger than 1
1 ⁄ " sink/counter hole.
2
Hot & Cool models only
Star Nut
1 5 ⁄ " Small
8
Steel Washer
Fiber
Washer
1 5
⁄ " Rubber
8
Washer
Figure 2
1 ⁄ " is required.
2
View/Wave
I I
Unpack dispenser components.
I I
On a firm, flat surface, carefully
straighten the copper tubing using
hands only.
View/Wave
For a standard 1
I I
Feed tubes down through the hole in
the sink/counter until the base is at
rest. Set faucet at desired angle.
Large washer required for sink holes larger
than 1 1 " or for porcelain sinks with radius
⁄
2
or beveled holes.
I I
1 ⁄ " Before feeding tubes through sink
2
hole, remove extension. Place 2
large steel washer over threads on
faucet base. Reinstall extension.
View/Wave
I I
From under sink, slide 2
over threaded extension. Thread star
nut onto extension until snug.
Hot & Cool models only
I I
Attach the quick connector to the ends
of the copper tubes running from the
dispenser.
I I
Install a white 3/8" tube into other end
of quick connector.
Installing into hole smaller than 1
I I
Unscrew and remove threaded extension
from valve body. Do not discard, as you
will need this later (See Figure 1).
I I
Leave small washers in place.
Star Nut
I I
Feed tubes down through the hole in
the sink/counter until the base is at
rest. Set faucet at desired angle.
I I
From under sink, slide 2
over faucet base. Reinstall threaded
extension onto the base until snug.
Thread star nut onto extension until
snug (See Figure 2).
1 " sink/counter hole
⁄
2
1
⁄
4
1 ⁄
" fiber washer
4
1 ⁄ "
2
⁄
1
" fiber washer
4
"