Parameter Table - Nautyl PHCP50A Guide D'installation Et D'utilisation

4. USAGE
4.2.8 Malfunction display
There will be malfunction code showing on the controller screen when relative malfunction occurs. You
can refer to the malfunction table to find out the failure cause and solution. For example：

4.3 Parameter table

Code
r01 Set-point of cooling target temp.
r02 Set-point of heating target temp.
r03
Set-point of auto mode target temp.
Meaning
Water inlet temp. Sensor failure
Default
27℃
27℃
27℃
Remarks
Ajustable
Ajustable
Ajustable
14