Clock Setting - Nautyl PHCP50A Guide D'installation Et D'utilisation

4. USAGE

4.2.5 Clock setting

In the main interface，press"CLOCK" twice，Hours start to flashing ，and press"
value or press" "to decrease value，and press"CLOCK"to setting；At the same time, minute start
to flashing ，press"
save setting.
Press" "can not save setting parameter and back to main interface.
Attention：If there is no operation for 5s system will remember parameter setting and back to the main
interface.
Press
"CLOCK"
11
"to increase value or press" " to decrease value，and press" CLOCK"to
Hours
Press "CLOCK"
Press " "
or " "
Press " "
or " "
" to increase
Minute
Press
"CLOCK"
Press
"CLOCK"