How To Operate - Nostalgia SNOW CONE SC7 Serie Manuel D'instructions

HOW TO OPERATE

Before first use, follow the directions for cleaning under CLEANING & MAINTENANCE.
1. Place the SNOW CONE PARTY STATION on a stable, waterproof surface near an electrical
outlet before starting, and make sure that the cord is away from any water source.
2. Before plugging in the unit, remove the Ice Shaving Compartment Lid and add ice cubes to
the Ice Shaving Compartment. Be sure the Shaved Ice Bin is in place to catch the shaved ice.
NOTE: Do not overfill the Ice Shaving Canister. Make sure that
there is enough room to put the Lid back on.
3. Plug in the unit.
4. Turn the Ice Shaving Compartment Lid counter-clockwise to lock and
Unit is ON
turn on unit. The unit will immediately begin shaving the ice.
5. Repeat this process until you have shaved the amount of ice desired.
6. To shave ice using the Flip-down Single Snow Cone Holder, remove the Shaved
Ice Bin, flip down the holder, then place a snow cone into the holder.
7. When finished shaving ice, turn the Ice Shaving Compartment
Lid clockwise and unplug the unit from the outlet.
8. To serve, pull out the Shaved Ice Bin and scoop out the shaved ice using the
provided Ice Scoop. Fill the Plastic Cones with the desired amount of shaved ice.
9. Squirt your favorite flavored syrup onto the shaved ice and serve.
Unit is OFF
6