Start-Up Operation; Utilization - Soehnle CHILL & GO XL Mode D'emploi

EN

6. Start-up Operation

Please read through these operating instructions in proper order.
Attaching the massage seat pad
The massage seat pad can be used
on an office chair or any other seat
or chair with a vertical backrest of
sufficient height and a sufficient
seat cushion depth.
The convenient velcro fasteners will
ensure that the massage seat pad
does not slide during use.
Connecting the power supply
Connect the low-voltage plug to the low-voltage
socket on the massage seat pad and the power plug of the power
supply unit to the power outlet.
Note
For safety reasons the massage seat pad may be operated only
with the enclosed power supply unit, not any other device.

7. Utilization

Test the massage seat pad prior to use by carefully sitting down
on it. When in resting position, the massage heads will be in your
lumbar area. Carefully lean onto the back rest to find out how
much pressure you would like to use.
It is important that you sit in the middle so that the massage
heads do not massage the spine. Due to the removable seat pad,
the massage seat pad can easily be positioned on all commonly
available chairs.
On/off switch
Use the On/Off switch to switch the massage seat pad on.
18