Inserting Or Replacing Batteries - Perry TE400B Mode D'emploi

6 - TEMPERATURE DIFFERENTIAL VALUE SETTING - t
The thermostat operates in differential
modes (ON-OFF) with a modifiable
differential value (factory-set to 0,5 °C).
Changing the differential:
dip-switches, located on the back of the
thermostat, for the required differential
value.
7 - FIXING THE THERMOSTAT TO BASE
Fit the body to the base as shown in fig. A.
Exert light pressure until you hear the click of the attachment
hooks.
To remove the thermostat insert a smal screwdriver as a lever in
the position corresponding to the attachment hooks (fig. B).

8 - INSERTING OR REPLACING BATTERIES

! Open the cover of the battery compartment.
!
Replace the dead batteries with two 1,5 V
type AAA (LR03) alkaline batteries
attention to their polarity.
!
Close the cover.
position the
, paying
ON
1 2 1
Dt = 0,3 °C Dt = 0,5 °C
Attachment hooks
fig. A
OFF
ON
ON ON ON
2 1 2 1 2
Dt = 0,7 °C Dt = 0,9 °C
fig. B
ON OFF
G
B
7