Securing Child In Child Restraint - Harmony DEFENDER 360 Manuel D'instructions

!
Avoid unnecessary bulky clothing.

SECURING CHILD IN CHILD RESTRAINT

• Adjust
"Preparing child restraint for use").
1. Open harness chest clip by pressing
in pin clips while pulling apart the
two-piece chest clip ❶.
2. To loosen the harness strap:
Push the up-front harness metal
adjustment button at the front
of the seat just ABOVE the
adjustment
fabric) ❷ and simultaneously pull
the chest strap towards you ❸.
3. Unbuckle
pressing on the RED buckle
release button and by pulling the
buckle clips out ❹. Move harness
straps to the side.
4. Place child in child restraint with
child's back flat against back of the
backrest.
5. Adjust headrest height so that
the bottom of the headrest is
even with the top of the child's
shoulders.
6. Place harness straps over child's
shoulders and insert buckle clips
into buckle until they 'click' into
place ❺.
! ENSURE that harness clips and buckle are properly
fastened by gently tugging on each.
! ENSURE that the straps are NOT twisted.
harness
strap
harness
height (see
(under the
straps
❶
by
❸
❷
❹
❺
34