Technical Data - Kampa BRUCE Instructions De Montage Et De Service

➤When using the barbecue after a period of
storage, check for gas leaks and for obstructions
in the burner before using.
Troubleshooting
Fault
Burner will not light
Low flame, barbecue not getting
hot enough
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
Disposal
➤Place the packaging material in the appropriate
recycling waste bins, wherever possible.
If you wish to finally dispose of the product,
M
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.
Possible cause
Gas cylinder is empty
Regulator valve is not open
Control valve is not open
Gas cylinder is empty
Obstruction in burner
Obstruction in gas jet
Windy conditions
Lid not on
4445103357
Solution
Replace with a full gas cylinder
Open regulator valve
Open control valve
Replace with a full gas cylinder
Clean burner
Clean jet on valve
Move to a more sheltered position
Try cooking with the lid on to retain heat

Technical data

Gas category:
Heat input:
Dimensions
(H x W x D):
Weight:
Gas Barbecue BRUCE
I /I
3+ 3B/P
2.5 kW (189 g/h)
490 x 295 x 285 mm
3.5 kg
13