Location Of Controls - SOUNDMASTER MCD4500 Mode D'emploi

LOCATION OF CONTROLS

1) DUST COVER
2) LCD DISPLAY
3) RECORD BUTTON
4) SOURCE BUTTON
5) POWER LED INDICATOR
6) FUNCTION SELECTOR
7) 3.5MM HEADPHONE JACK
8) USB SOCKET
9) CASSETTE DECK (1) DOOR
10) BAND/FM STEREO SELECTOR
11) SD/MMC CARD SLOT
12) MP3 FOLDER UP BUTTON
13) SKIP DOWN BUTTON
14) DECK 1 CONTROL KEY
RECORD KEY
PLAYBACK KEY
REWIND KEY
FAST FORWARD KEY
STO/EJECT KEY
PAUSE KEY
15) CD DOOR
16) PLAY/PAUSE/STOP
17) X-BASS ON/OFF BUTTON
18) REMOTE SENSOR
19) POWER ON/OFF / VOLUME UP/DOWN KNOB
20) TUNING KNOB
21) FM STEREO LED INDICATOR
22) CASSETTE DECK (2) DOOR
23) HI-SPEED DUBBING BUTTON
24) SKIP UP BUTTON
25) LED DIAL POINTER
26) DECK (2) CONTROL KEYS
27) CD DORR OPEN BUTTON
28) SPINDLE ADAPTOR
29) 33/45/78 RPM SPEED SELECTOR
30) PICK-UP HOLDER
31) FM ANTENNA
32) LINE OUT SOCKET
33) SPEAKER TERMINAL
34) AUTO STOP ON/OFF SWITCH
35) AC LINE CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
• UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
TOP COVER ASSEMBLY
1. PUSH THE METAL BRACKET TO REAR SIDE.
2. CONNECT THE METAL BRACKET TO THE TOP COVER
3.
CONNECT THE HINGE OF THE TOP COVER TO THE MAIN UNIT
BUTTON
E-1