Kampa Travel Pod Touring AIR Guide D'utilisateur page 7

Setting Up
If the inner tent is not already installed,
8
take the inner tent inside and suspend
from the colour coded buckles (8).
Attach the remaining suspension
points.
Attach the base of the inners to
9
the corresponding buckles on the
groundsheet (9). It will be easier to
attach the rear points before fully
suspending the inner tent.
The inner tent can remain
permanently installed whilst the tent is
deflated and inflated.
10
Install the canopy groundsheet
by attaching the toggles on the
groundsheet to the corresponding 'O'
rings situated around the inside of the
canopy (10).
Storm Tie Down Kit (11)
For extra security the tent is suppled
with a Storm Tie Down Kit. Attach
each tie down to the side release
buckle already sewn to each corner
of the tent. At the other end of the
tie down you will find a metal 'D'
ring. Ensure that the storm strap is
pegged under tension but not so that
it distorts the shape of the tent.
7
TP-TOURING-AIR-UM-10-17-Rev.A