Operation - Ryobi RY120350 Manuel D'utilisation

WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
WARNING:
Never direct a water stream toward people or pets, or
any electrical device. Failure to follow these instructions
could result in serious injury, electric shock, or death.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts, caps,
etc. Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts
are replaced. Please contact customer service or an
authorized service center for assistance.
APPLICATIONS
You may use this product for the purpose of cleaning objects
like the examples listed below:
Patio furniture, windows, automobiles, boats, or RVs


OPERATION

INSTALLING/REMOVING BATTERY PACK
See Figures 6 - 7.
WARNING:
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
To install:
Open the battery cover by releasing the latch and opening

the cover.
Insert the battery pack into the product as shown.

 Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
product before beginning operation.
Close the battery cover and fasten the latch to secure

the cover.
WARNING:
Do not use the power cleaner unless the battery cover
is fully closed and latched. NEVER allow water to enter
the battery compartment.
To remove:
Unlock and open the battery cover.

 Depress the latches to remove the battery pack.
Close and secure the battery cover.

WARNING:
Battery tools are always in operating condition. Therefore,
switch should always be locked with hands free of the
lock-out button when not in use. Remove battery pack
when transporting or carrying the tool to avoid accidental
starting, which may result in serious injury.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
8 — English