Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Quick Set-Up
Quick Set-Up
In the pages of this manual you will find a detailed explanation of all the Expedition Express' functions and
controls, but if you just want to get started quickly, you can follow the steps below.
•
Be sure that the EXL250m Power switch is set to the OFF position.
•
Turn the MAIN VOLUME and the CHANNEL VOLUME controls fully counterclockwise to the off position.
•
Connect the supplied speaker cable from the EXL250m's SPEAKER RIGHT OUT to the EXL250e's
SPEAKER INPUT.
•
Connect the power cable to an AC socket. Turn the Power Switch to the ON position.
•
Plug one end of the supplied microphone cable into the R21 microphone and the other end into the
EXL250m's channel 1 MIC INPUT.
•
Set the MAIN VOLUME control to the "12:00" position.
•
While speaking into the microphone, slowly raise the channel 1 VOLUME control until you reach the
desired level.
8
Publicité
Table des Matières
