Quick Start; Auto Power Off; Hdmi Control; Playback Setting - Yamaha BD-S1065 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

■ Quick Start

This turns the Quick Start function on and off.
When the Quick Start function is on:
– The startup time of the Player is reduced.
– However, power consumption will increase.
– The QUICK indicator lights up.
When the Quick Start function is off:
– The player will enter the low power consumption
mode when in standby condition.
Yes, No*
Note
– When "Quick Start" is set to "Yes", the Player
requires some time to turn off.

■ Auto Power Off

This sets the Player so that power is automatically shut off
if playback is stopped for about 10 minutes.
Yes, No*

■ HDMI Control

This lets you set the Player to receive the control signal
from the remote control of the TV compatible with the
HDMI control function via the HDMI cable.
Yes, No*
Notes
– For details, refer to "Controlling the Blu-ray disc
player using the HDMI control function" (page 18)
and the operation manual of AV receiver and TV.
– If "Component" is selected in "Video Out Select",
HDMI Control function is not available. Select
"HDMI" if you want to use HDMI Control features.

■ Playback Setting

Parental Control
In some digital broadcasts and BD/DVD video discs, a
control level for disc viewing is set depending on the age
of the viewer. This lets you set the Parental Control
depending on the disc content. The available Parental
Control Levels are shown below.
The 4-digit password number needs to be entered before
the Parental Control Levels and the Country Code are set.
The Parental Control Levels and the Country Code cannot
be set if a password has not been created or the password
is not entered.
For DVD-VIDEO
8 and Off*:
All DVD-video can be played.
1-7:
Prohibits play of DVD-video with corresponding
ratings recorded on them.
For BD-ROM
No Limit*:
All BD-video can be played.
0-99 year(s):
Prohibits play of BD-video with corresponding
ratings recorded on them.
Country code
Sets the country code. Refer to the Country Code List (page 38)
because the ratings differ according to the country.
Note
– Refer to "Example of the Setup Menu operation" on
page 30 for details.
Disc Language
This lets you select the language for subtitles, audio and
menus displayed on the screen.
Subtitle
Refer to the Language List. (page 38)
Audio
Refer to the Language List. (page 38)
Menu
Refer to the Language List and Language Code List. (page 38)
Angle Mark Display
This lets you turn the Angle Mark Display on or off when
BD/DVD video recorded with multiple angles is played
back. (The Angle Mark is displayed in the lower right
screen.)
Yes, No*
Password Setting
This sets the password for setting or changing the Parental
Control Level.
Yes:
Enter the 4-digit number.
No:
Cancels the password setting.
Notes
– When you forget the password, you can reset the
current password using "System Reset" under
"Settings". (page 34)
– You can also set the new password if desired.
BD Internet Access
This allows you to set access restriction to BD-LIVE
contents.
Permit:
Allow all BD-LIVE discs.
Limit*:
Allow only discs with owner certification.
Prohibit:
Prohibit all BD-LIVE discs.
Notes
– The available functions differ depending on the disc.
– Regarding playback method of BD-LIVE contents,
etc., perform the operations in accordance with the
instructions in the BD disc manual.
– To enjoy BD-LIVE functions, perform the
broadband internet connection (page 14) and
communication settings (pages 34–36).
Settings
4
33
En

Publicité

Table des Matières
loading

Table des Matières