3/ If the bottle's diameter allows it, add the heating accelerator ring (b)
to the tank (f ).
Tigex tip
In order to avoid spreading bacteria, prepare and heat bottles and baby
food jars just before meal time. Never keep an unfinished bottle.
4/ HOME USE
Plug in the appliance at the mains using the mains
cable (g). Turn the switch at the back of the appliance
to the Home position.
CAR USE
Connect the car adapter lead (h) into the back of the
appliance and flick the switch at the back into the Car
position. Then connect the lead (h) into your car's ci-
gar-lighter.
5/ Press the ON switch (d) to start the warming cycle.
The light will be activated (e ).
The ON switch (d) cannot be used to turn the ap-
pliance off.
The appliance will turn off automatically once the
warming cycle is complete.
CAUTION: the steam that is released during heating is
very hot. Do not put your hand close to the appliance
while it is in use.
6/ Without delaying, carefully remove the bottle or baby food jar and
then turn the switch at the back of the appliance to the OFF position.
You may now unplug the appliance.
For a bottle: screw the ring back on properly and then shake well to
ensure even distribution of the contents. Pour a few drops of the liquid
on to the back of your hand to test the temperature.
For a baby food jar: stir the contents and test the temperature.
Make sure that the appliance has cooled down before cleaning it or put-
ting it away.
12
OFF
OFF
OFF
OFF
OFF
OFF