Publicité
I
ENGLISH
1 .)Before starting, please read our assembling instructions carefully and make yourself familiar with them.
2.)Follow our assembling instructions carefully.
3.)Compare
the listed parts and fitting list to the contents of the cardboard.
4.)Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
some way to difficulties during the assembling.
5.)To make sure that the furniture will not be damaged or grated during assembling, prepare an adequate area and
cover the floor with the cardboards or another soft pad (i.e. cloth or carpet).
6.)We recommend operating always with two or more people.
7.)Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.)Keep the instruction and service sheets. Perhaps you will need them later on.
For wooden furniture consisting of glass and steel or MDF and coated surface:
Wooden Furniture: Stains can be taken off with a soft, moistened cloth or by using a special polish (available in supermarket
and specialized stores). But do not forget to wipe the surface with a dry and soft cloth afterwards.
Steel furniture:
The meta I has a varnished surface. The material could show little discrepancies in colour, c10uds or stains due to the machine
made production which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport, you could carefully try to twist them into the original
position. Please do not overwind the screws and retight them from time to time.
MDF and coated surfaces:
MDF consists of wooden fibres (please read the a.m. instructions). Do not work on the coated surfaces with knives or sharp
objects, as this could cause damage the material.That should not be a reason for complaints afterwards.
Due to machine made production, the MDF parts can have sharp edges. You could chamfer them with a fine standard
sand paper. Please do it carefully in order to make sure that you will not remove too much of the material.
Carrying out the assembly is for adults only. Please, keep your children away during assembling. Children might take small
parts or fittings away or swallow them up. During assembling it could also happen that parts of your furniture fall down on
your children. Please, therefore, protect them and make sure that you carry out the assembling in their absence.
If your piece of furniture consists of glass, it should be handled carefully during assembling. Glass can break at any time
and cause injuries. Therefore, you should protect your eyes and hands by wearing special c10thing and safety shoes,
available in the supermarkets and specialized stores.
We are not liable for any material damage or injuries resulting from faulty assembling. We are also not Iiable for any
damage resultant from lack of maintenance during use. (i.e. retightening of screws, and etc ... ). We are not liable for any
damage caused by faulty use or use against its purpose.
We wish you a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team
Inter Link SAS /
Important assembling suggestions:
Ma;ntenance adv;ce:
Warn;ng:
Bad tools lead in
Inter Unk S.A.S.
ZA
du NIedelweld
F-67470 SeJtzlFrance
TeI8ron:
Publicité
