Preliminary Checks - Stagnoli ULIXES Instructions

Preliminary checks

Check the following points before commencing to install Ulixes:
•
Check that the gate structure is sufficiently robust and there are no points of friction.
•
Check the condition of the gate hinges; make sure they are adequately lubricated.
•
Check there is a mechanical stop in closing.
•
Check value "C" before installing, observing the specifications in the assembly table (Tab.1, Tab. 2).
By increasing value "B" the opening angle is reduced, peripheral speed and the thrust of the motor on
the gate is increased; to the contrary, by increasing "A" the opening angle is increased, peripheral speed
and the thrust of the motor on the gate is reduced.
Tab. 1
OPENING
Travel 350 90°
90°
Travel 350
90°
Travel 350
Travel 350 90°
Travel 350 115°
Travel 350 115°
Istruzioni , Instructions, Betriebsanleitung, , Instrucciones
A D
Opening
A B C D
90 143 60 550
90 140 40 550
90 120 20 550
90 100 0 550
120 83 20 530
120 83 0 530
Tab. 2
OPENING
Travel 500 90°
Travel 500 90°
Travel 500 115°
Travel 500 115°
A
A B C D
130 143 60 600
130 140 40 600
150 103 20 600
150 100 0 600
13