MSI 890FXA-GD70 Serie Mode D'emploi page 39

Debug LED Panel
Please refer to the table below to get more nformaton about the Debug LED mes-
sage.
Post Status
FF Power on and first ntalze CPU.
C0, C1, C2 Early CPU Intalze.
C4, C6 Intalze chpset.
D4, D5 Intalze memory.
08 Intalze keyboard.
2A, 31 Intalze onboard devces. Load Opton ROM (VGA and RAID opton
ROM) from BIOS to memory.
37 Dsplayng sgn-on message, CPU nformaton, setup key message
and any OEM specfic nformaton.
38 Intalze USB devce and dfferent devces.
3C Md POST ntalzaton of chpset regsters. Detect dfferent devces
(parallel ports, seral ports and coprocessor n CPU...etc.)
75, 78 Intalze INT 13 devces and IPL devces. (nclude SATA/ PATA HDD
and CD/DVD ROM).
87 Enter setup screen. BIOS setup f needed/ requested.
A4 Wat for user nput at configuraton dsplay f needed.
A7 Dsplay the system configuraton screen f enabled.
B1 Save system context for ACPI (Advanced Configuraton and Power
Interface).Prepare gve control to OS loader (INT 19H).
00 Pass control to OS Loader (typcally INT 19H).
AA Enter OS.
Englsh
En-29