PARMAZ ARD-12 Mode D'emploi page 33

3. Connect the end part of the flexible pipe to the round
fitting for the window (2).
The drainage tube can be compressed to mínimum 45
mm and extended to maximum 1500 mm. lt is
advisable to keep the tube compressed to the
mínimum.
USE WITH WINDOW UNIT KIT
1. Make a hole having a diameter of roughly 133
mm on the glass window.
3. lnsert the round fitting into the retractable flexible
pipe and insert the latter with its round fitting into
the window unit without the plug.
lf the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.
Connect the power cord to a suitable electric socket (220-240 V). lnsert the supplied batteries into the remote control
and make sure the poles match. Select the desired operating mode from the remote control.
4. Open the windows and lock one of the two leaves
with the handle.
Place the end fitting against the fixed leaf of the
window and
draw the other leaf against it.
Yesl
5. Avoid tight bends and folds in the flexible pipe.
2. lnsert the window unit into the window.
4. lnsert the round fitting onto the flexible pipe.
5. lnsert the flexible pipe thus mounted into the rear of the
air conditioner.
!
33