Appliance Start-Up - PARMAZ ARD-12 Mode D'emploi

Open the packaging and pull out the box. Remove the product and the other elements supplied (illustrated in the box
below).
lnfrared remole control. + button battery
(CR2032/3V)
Round fitting (1) for positioning between
o
the air discharge outlet and the flexible
pipe.
Window unit kit with plug.
Position the product vertically on a flat and stable surface, as close as possible to a window and at least 50 cm from
walls or other nearby obstacles.
USE WITH END FITTING FOR WINDOW
1. Connect the round fitting (1) to the flexible pipe,
extend the tube until it reaches the outside and
connect to the rear of the air conditioner.

APPLIANCE START-UP

Flexible pipe.
Round fitting for window
unit, for positioning
between the end of the
tube and the window unit
itself.
End fitting for window (2).
o
Drainage tube (continuous
drainage).
( O )
2. Slide the flat fitting downwards into the grooves (A)
and secure it with the hook on top (B).
A
a
)
I
32