Hayward ZKD Séries Manuel D'installation page 6

Paragraph 2 – Timed Weekly Dosage
PROG
Configuration
Pump Funtions
-
+
Pump Functions
Weekly Timer
Weekly Timer
-
Clock
Wed - 08:00
It is possible to programme 10 dosages for the whole week. Press
programme the dosages.
1) The programme number can be modified using the
2) The dosage time can be modified using the
3) The dosage quantity can be set in "ml" using the
4) The dosage time, that is to say the time (in seconds) during which you wish to dose the set quantity, can be set
in "cc" using the
5) The values of the relay connected to dosage can be modified using the
pressing the key; in "Off" mode, the relay is not switched off (open), and in "after" mode the relay closes when
dosage is activated and remains closed once dosage is completed for the time (in seconds) set using the
keys and then confirmed by pressing the
time, for the time (in seconds) set using the
6) Day activation, or rather the days on which you want the set programme to be active (start time, quantity,
dosage duration and relay operating mode). Press the
activate/deactivate dosage and the
automatically to the next programme.
Repeat the whole procedure if you need to programme the new programme, or press
menu.
The next step in the main menu is programming the clock. This can be done by pressing the
changes, using the
the day, hour and minutes in sequence. Obviously, the set time and day are those that the programming will refer
to.
Hayward Flow Control
1) -
PROG01 MTWTFSS
+
00.00 _______
ESC
-
-
+
+
keys and confirmed by pressing the
key. In "before" mode, the relay closes before the dosage activation
key to change the day of the week. Press
to set the required values and then confirming by pressing the
www.haywardflowcontrol.com
2)
PROG01 hh.mm
Time - 00.00
3)
PROG01
-
Q.ty 0ml
4)
PROG01
-
Dos.Time 0 s
5)
PROG01 PROG01
-
Rel.Off
Rel.Off
6)
PROG01 MTWTFSS
Weekly _______
-
+
in the "weekly timer" mode in order to
keys and confirmed by pressing the
keys and confirmed by pressing the
keys and confirmed by pressing the
key
keys and then confirmed by pressing the
key to make changes, then press the
-
-
+
+
-
+
-
+
-
+
-
+
key.
keys and confirmed by
key.
to confirm and move
to return to the main
key. You can set
1-888-INDL (1-888-429-4635)
key.
key
key to
to make
ZKDIOM
Pg. 4 of 10