Step 3: Insert the top tube support cap into the top tube.
Step 4: Screw the handle through the top tube support cap into the top tube.
REMEMBER: Portable electric heaters are designed for spot heating or as a supplementary heat source. They are
not intended to be the main source of heat during cold months.
Caution: If you must use an extension cord, the cord should be at least No. 14 AWG and rated for no less
than 1875 W.
You must always make sure that there is at least 1' 6" (50 cm) of empty space above the heater,
9" (25 cm) from the side and 5' (1.8 m) below the heater.
3