Temperature Setting And Control; Light Switch - Bonnet Neve BOWL EVO LT Instructions Pour L'utilisateur

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
19.

TEMPERATURE SETTING AND CONTROL

Each refrigerating appliance is provided with an electronic control for automatic maintenance
of the appropriate pre-established temperature inside the tank.
This temperature adjuster is gauged by the factory and should not be touched by the user.
Only if the average internal temperature is too cold or not cold you can increment or decrement
the temperature:
1. Unlock the electronic controller by hold down "SET" button for 5 sec. (on the display the
word "UNLOCK" will appear).
1. Press the (SET) key in order to see on display the temperature set point.
2. Press the (▲) key or the (▼) key in order to increment or decrement the temperature
set point.
3. Press the (SET) key in order to store the new temperature set point.

LIGHT SWITCH

(Short pressure)
BOWL EVO LT
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
2 7 / 7 2
PAGE
UM000387
N° DOC