General Information - Bonnet Neve BOWL EVO LT Instructions Pour L'utilisateur

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
2.

GENERAL INFORMATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral
soap then dry it with a soft cloth; for the glass parts only use specific products, avoiding the
use of water which can leave on the glasses limestone residues.
• It is necessary that the capacitor unit is in the free air exchange condition, therefore the
ventilation zones must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power socket.
• Never place containers of liquid on or immediately above the ticket counter; should the
content spill out, it would damage the counter.
• The measured sound pressure emanated A is below 70dB (A).
It is fundamental to comply with the distances indicated (cm) for correct
installation of the equipment.
10
3. LOADING
Warning! It's absolutely forbidden to place the
product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to
avoid altering correct air circulation and thereby avoid a higher
product temperature.
Attention!
It is strictly necessary to comply with the max loads
indicated (Kg) for each shelf to avoid deformation or
breakage.
BOWL EVO LT
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING
IN DANGEROUS ENVIRONMENT WITH RISK OF FIRE,
EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on
technical data plate.
CLIMATE CLASS
0
1
2
3
4
6
5
7
8
1 9 / 7 2
PAGE
N° DOC
ENVIRONMENT OPERATING
TEMPERATURE
20
16
22
25
30
27
40
35
23,9
UM000387
39 Kg
39 Kg
39 Kg
39 Kg
39 Kg