Operation; Button Instruction - Galanz GLR18FS5M16 Manuel D'utilisation

OPERATION

BUTTON INSTRUCTION OF DISPLAY
The below picture is a schematic diagram of an electronic
display.
R efrigeration
temperature display
F ridge button
SETTING THE TEMPERATURE

Button instruction

button: adjust the setting temperature of
refrigerating chamber (press down is effective).
button: adjust the setting temperature of freezing
freezing chamber (press down is effective).
button: with each click (within 5 seconds), the
corresponding function icon flickers, and then switch
among quick freezing- intelligence successively (press
down is effective). No operation within 5 seconds will end.
After the child lock is unlock, press
temperature display unit to the operation done mentioned
earlier, can be switched to Celsius or Fahrenheit, light of
" " will be turned on according to the operation done
mentioned earlier.
9
F unction mode
F reezing temperature
display area display
F reezer button Select button
8 seconds,
Note: Each effective keystroke operation is
accompanied by a buzz,
The LED display turns bright when the door is open. Push the
button. The buzzer rings. Then the refrigerating room
turns into the setting condition. The temperature patterns
turn flash and the temperature of the refrigerating room will
update by pushing the button once time, which the
temperature will recycle From
Warning: The temperature will be set
the will disappear without setting operation
over 5 seconds.
The setting of the freezing room
The LED display turns bright when the door is open. Push
the button. The buzzer rings. Then the freezing
room turns into the setting condition. The temperature turns
flash and the temperature of the freezer room will update by
pushing the button once time, which the temperature will
recycle from F -8 F
Warning: The temperature will be set successfully
and the will disappear if stop setting over 5
seconds.
once per second.
F F
and