Fein KBM 32 Q Notice D'utilisation page 12

3 41 01 011 06 3.book Seite 12 Montag, 16. Februar 2015 12:50 12
EN
Symbol Term, meaning
DANGER
DANGER
WARNING
WARNING
CAUTION
CAUTION
It is forbidden to dispose of
the product in the unsorted
household waste.
Class of protection I
mm Millimeter
kg Kilogram
V Volt
A Ampere
W Watt
N Newton
min Minutes
~ or a. c. Current type
or d. c. Current type
1 ~ Power supply type
n No-load speed
o
1/min per minute
Ø Diameter
For your safety.
Do not use this power tool before you
have thoroughly read and completely
understood this Instruction Manual and the
enclosed "General Safety Instructions" (docu-
ment number 3 41 30 054 06 1), including the
figures, specifications, safety regulations and the
signs indicating DANGER, WARNING and
CAUTION.
Please also observe the relevant national indus-
trial safety regulations (e.g. in Germany:
BGV A3).
Non-observance of the safety instructions in the
said documentation can lead to an electric shock,
burns and/or severe injuries.
12
Explanation
This sign warns of a directly imminent, dangerous
situation. A false reaction can cause a severe or
fatal injury.
This sign indicates a possible dangerous situation
that could cause severe or fatal injury.
This sign warns of a possible dangerous situation
that could cause injury.
Worn out power tools and other electrotechnical
and electrical products should be sorted sepa-
rately for environment-friendly recycling.
Product with basic insulation and exposed (touch-
able), conductive parts additionally connected to
the protective earth conductor.
Unit of measure for length, width, height or depth
Unit of measure for the mass
Unit of measure for the electric voltage
Unit of measure for the electric current intensity
Unit of measure for the output
Unit of measure for the force
Unit of measure for the time
Alternating current
Direct current
Alternating current single-phase
Revolution speed at no-load
Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
Diameter of a round part
This Instruction Manual and the enclosed "Gen-
eral Safety Instructions" should be kept for later
use and enclosed with the power tool, should it
be passed on or sold.
Special safety instructions.
Secure the power tool with the clamping strap
supplied if there is danger of it falling, especially
for work carried out at a height, on vertical con-
struction elements or above the head. If there is a
power cut, or the mains plug is pulled out, the
magnetic holding power is not maintained.
When working overhead or on vertical surfaces,
the coolant container must not be used. Use a
coolant spray instead. Liquids penetrating
your electric power tool may cause electric
shock.
KBM 32 Q