Controls And Displays; Explanation Of Warning Symbols And Notes; Getting Started; Bluetooth ® Pairing - Hama 00136691 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and infor-
mation completely. Please keep these instructions in a safe
place for future reference. If you sell the device, please pass
these operating instructions on to the new owner.

Controls and Displays

1. Multifunction button (Power/Play/Pause/Telephone/
Pairing)
2. + button (Volume up, Previous track)
3. - button (Volume down, Next track)
4. Status LED
5. Micro-USB connection
6. Microphone
7. Opening for retaining clip

1. Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important
notes.
2. Package Contents
• Mini Bluetooth
receiver
®
• Micro-USB charging cable
• Adapter 3.5 mm socket – 3.5 mm socket
• Metal clip (for attaching the receiver to clothing or pockets,
for example)
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters
or other heat sources or in direct sunlight.
• Do not allow yourself to be distracted by the product,
for example when driving a vehicle or operating sports
equipment. Always pay attention to the surrounding traffic
and your environment.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits given
in the specifications.
• Do not open the device or continue to operate it if it
becomes damaged.
• Since the battery is integrated and cannot be removed, you
will need to dispose of the product as a whole. Do this in
compliance with the legal requirements.
2
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
• Use the product for its intended purpose only.
• Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
Warning – Rechargeable battery
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are
defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to completely
discharge.
• Avoid storing, charging or using the device in extreme temperatures
and extremely low atmospheric pressure (for example, at high
altitudes).
• When stored over a long period of time, batteries should be charged
regularly (at least every three months).
• Do not charge and discharge the product simultaneously.

4. Getting started

• The Bluetooth
receiver has an integrated lithium polymer
®
battery. Before using the device for the first time, fully
charge the Bluetooth
®
source (USB charger or USB socket on a PC/notebook) and
the supplied USB cable.
• The status LED is constantly lit red during charging.
• Charging begins and ends automatically.
• Once charging has finished, the status LED goes out. The
battery is now fully charged.
5. Operation
5.1 Bluetooth
pairing
®
Note
• Make sure that your Bluetooth
is on and Bluetooth
®
• For more information, please refer to the operating
instructions of your terminal device.
• Please connect the Bluetooth
(or AUX) socket of the receiver device (for example, on
the car radio).
• Press the Multifunction button (1) and hold it for 2
seconds, in order to switch on the Bluetooth
activate the discoverable mode (LED (4) flashes blue).
• Then activate the Bluetooth
device (for example, smartphone) and select the device
'Bluetooth
®
Receiver 1'.
• The status LED (4) is constantly lit blue – the device is now
connected and ready to use.
receiver using a suitable power
®
-capable terminal device
is activated.
receiver to the 3.5 mm jack
®
®
receiver and
®
function on your transmitter

Publicité

Table des Matières
loading

Table des Matières