Intended Use; Technical Description - Dometic GROUP WAECO PerfectView MC402 Instructions De Montage

MC402
5

Intended use

The moniceiver (item. no. 9102100024) is intended for installation and use in
a vehicle with an on-board 12 Vg power supply and must be installed in a
double DIN slot. The device combines the functions of a car radio, CD player,
DVD player, playback device for external audio and video sources and a
hands-free system for mobile phones.
!
WARNING! Danger of death or serious injury.
 When using the device, ensure your are not distracted when
driving (e.g. connect MP3 player and selected playlist/radio
station before starting the journey, programme in pre-set but-
tons for different radio stations if necessary).
 Observe the current laws and regulations of the country in
which the device is being used.
 Reversing video systems are designed merely as an additional
aid for reversing, however this does not relieve you of the duty
to take proper care when reversing.
6

Technical description

The moniceiver is located in a housing which occupies two slots in the vehi-
cle's centre console.
The device can be connected to the handbrake switch. In this way, and for
safety reasons, no video can be played on the installed display while you are
driving. The display will only switch on if the vehicle is stationary and the
handbrake is in use.
If a reversing video camera is connected to the moniceiver, then the device
can be set so that the camera automatically switches on when the reverse
gear is engaged.
I
NOTE
You can find the full technical description in the detailed installa-
tion and operating manual on the internet under
www.dometic.com.
EN
Intended use
29