Sony SWF-BR100 Mode D'emploi page 18

Masquer les pouces Voir aussi pour SWF-BR100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ˎ Stays lit in red:
ˎ
ˎ - Check the location of the
subwoofer.
ˎ - Do not place the TV and
subwoofer in a metal cabinet.
ˎ - Place the subwoofer close to the
TV in a room.
ˎ - Make sure that the wireless
transceiver is inserted correctly
into the TV.
ˎ - Please confirm that power
setting of Wireless Subwoofer of
TV is Auto.
ˎ Flashes in green or amber slowly
ˎ
or turns red:
ˎ - Make the Secure Link setting
again.
ˎ - Sound transmission is poor.
Move the subwoofer so that the
power indicator turns green or
amber.
ˎ Flashes in red:
ˎ
ˎ - Press power to turn off the
subwoofer, and check that
nothing is blocking the
ventilation slit of the subwoofer.
A protection function may act by
excessive input. Please lower TV
volume or the SW level.
Noise is heard from the
subwoofer or sound from the
subwoofer is intermittent.
ˎ Move the subwoofer closer to the
ˎ
TV.
ˎ Do not install the TV and subwoofer
ˎ
in a closed rack, on a metal rack, or
under a table.
ˎ Move the subwoofer away from
ˎ
other wireless devices.
ˎ Avoid using any other wireless
ˎ
devices.
The sound output from the
subwoofer is very low.
ˎ Check the subwoofer level in the
ˎ
sound setting of the TV.
ˎ With some types of content such as
ˎ
news there will not be a lot of bass
sound, this is normal.
US
8
Specifications
Wireless Subwoofer
(SWF-BR100)
Amplifier section
For U.S.A model:
(FTC)
With 4 ohms load, subwoofer
channel driven, from 30 - 150 Hz;
rated 45 W per channel minimum
RMS power, with no more than 1%
total harmonic distortion from 250
milliwatts to rated output.
POWER OUTPUT (reference)
100 W (per channel at 4 ohms,
100 Hz)
For Canadian and Mexican model:
POWER OUTPUT (rated)
70 W (4 ohms, 100 Hz, 1% THD)
POWER OUTPUT (reference)
100 W (4 ohms, 100 Hz)
Speaker System
Subwoofer, sealed enclosure
Speaker Unit
200 mm cone type
Rated impedance
4 ohms
Power requirements
120 V AC, 60 Hz
Power consumption
On: 30W
Standby mode: 0.5W or less
Dimensions (approx.) (w/h/d)
272 mm x 305 mm x 395 mm
10 3/4 in x 12 1/8 in x 15 5/8 in
Mass (approx.)
12.2kg
26 lb 14 3/10 oz

Publicité

Table des Matières
loading

Table des Matières