Frequency Tolerance: ±20ppm or less
5.15-5.25GHz band is restricted to indoor
operations only.
This equipment complies with FCC
radiation exposure limits set forth for an
uncontrolled environment and meets the
FCC radio frequency (RF) Exposure
Guidelines. This equipment should be
installed and operated keeping the
radiator at least 20cm or more away from
person's body (excluding extremities:
hands, wrists, feet and ankles).
For UWT-BR100
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:(1) this device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
For the customer in Canada
This device complies with Industry
Canada license-exempt RSS standard(s).
Operation is subject to the following two
condition: (1) this device may not cause
interference, and (2) this device must
accept any interference, including
interference that may cause undesired
operation of the device.
5.15-5.25GHz band is restricted to indoor
operations only.
This equipment complies with IC
radiation exposure limits set forth for an
uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment should
be installed and operated keeping the
radiator at least 20cm or more away from
person's body (excluding extremities:
hands, wrists, feet and ankles).
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
US
4
Caution
This product is designed for use with
Sony TV. You should only use this
product on a compatible Sony TV.
Please read these safety instructions to
ensure your personal safety and prevent
property damage.
On safety
ˎ Should any solid object or liquid fall
ˎ
into the subwoofer, unplug the
subwoofer and have it checked by
qualified personnel before operating
it any further.
ˎ Do not climb on the subwoofer, as you
ˎ
may fall down and injure yourself, or
subwoofer damage may result.
ˎ Before operating the subwoofer, check
ˎ
that the operating voltage is identical
to your local power supply.
ˎ If you are not going to use the
ˎ
subwoofer for a long time, be sure to
disconnect the subwoofer from the
wall outlet (mains). To disconnect the
AC power cord (mains lead), grasp the
plug itself; never pull the cord.
ˎ AC power cord (mains lead) must be
ˎ
changed only at the qualified service
shop.
On placement
ˎ Place the subwoofer in a location with
ˎ
adequate ventilation to prevent heat
buildup and prolong the life of the
subwoofer.
ˎ Do not place the subwoofer near heat
ˎ
sources, or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.
ˎ Use caution when placing the
ˎ
subwoofer on surfaces that have been
specially treated (with wax, oil, polish,
etc.) as staining or discoloration of the
surface may result.
ˎ Take care to avoid any possible injury
ˎ
on the corners of the subwoofer.