Pedestal Assembly - KaZAM WeeRide Instructions De Montage

TIPS
1. Carry extra clothing for your child, such as a windbreaker, sweater etc. You are
active while cycling; the child is inactive and may feel cooler than you do.
2. Carry an air pump and repair kit, complete with all necessary tools, to repair a
tire or tighten nuts, bolts etc.
3. Young children are very sensitive to the UV rays from the sun. You can reduce
the damaging effects of the sun´s UV rays by wearing appropriate clothing, ap�
plying sunscreen lotions and wearing UV protective sunglasses.
ATTENTION
The responsible cyclist is the most important safety factor in the safe use of
a bicycle child carrier. You are responsible for the safety and security of your
child. Maintain awareness of road and riding conditions at all times. Be atten-
tive to the needs of the child. Check your bicycle and child carrier frequently to
confirm that they are in safe operating condition and that all component parts
are securely fastened.
Pedestal
Pedestal
Seat Base
manual WeeRide.indd 4

PEDESTAL ASSEMBLY

1. Remove screw and washer from bottom of
pedestal.
2. Insert pedestal tabs into tab slots on front of
child seat base.
3. Turn seat and pedestal upside down and
reinsert screw and washer through seat base
and into bottom of pedestal.
When securing hardware, apply normal hand
tightening using the tools supplied/required.
Torque requirement 10 Nm.
Pedestal
Seat
Seat Base
Cushion
Foot Rest
4
Seat Bottom
Foot Rest
Bottom
Pedestal
Bottom
11/01/11 03:14