Securing Child In Carrier - KaZAM WeeRide Instructions De Montage

SECURING CHILD IN CHILD CARRIER
BEFORE YOU RIDE THE BIKE
The bicycle should be tested and the controls
checked for proper function before a child is
placed in the child carrier. Take the bicycle for
a test ride WITHOUT a child in the carrier.
Confirm that the bicycle child carrier does not
interfere with the safe operation of the bicycle
before taking your child for a ride.
Before you take your child on the first ride in the
bicycle carrier, you should try the child carrier
and adjust the security harness for a comfortable
fit. Place the child in the carrier with the child's
feet in the foot support enclosures by opening
the locking lever in the back. Make sure to lock
this lever securely after the desired height is
reached. Position the shoulder straps on the
child's shoulders, with the straps close to the
child's neck, and position the shoulder tension
strap in the upper shoulder area, to keep the
straps from sliding o the child's shoulders.
Adjust straps until they are comfortably snug
when the child is sitting upright.
WARNING! Make certain your child is securely
buckled into the security harness before
riding the bike.
WARNING! Never leave your child in the child
carrier with the bicycle supported only by the
kickstand or leaning against a support.
* Image shown is European models only.
manual WeeRide.indd 9
CAUTION: Shoulder tension
strap should only be used on
child's back, never in the front
chest area.
To put the child in the seat, open the
buckle of the belt as indicated. Before
starting your ride, make sure the seat
belt is properly adjusted and that it
does not hurt the child. This adjust-
ment is made by sliding the belt
adjustors.
To adjust the height of the foot rest
that suits your child´s size, lift the red
lever and choose one of the available
positions. Close the red lever.
9
11/01/11 03:14