Eton raptor Mode D'emploi page 9

TO DELETE A MEMORY
simply program a new station into that memory.
CHARgINg CELL PHONES
The raptor provides 5Volts DC out put at 500 ma for cell phone charging from
the UsB socket on the unit. With the raptor on or off, plug in your cell phone
and press and hold the button labeled Cell until Cell will appear on the left
center of the display. To stop charging, press and hold Cell for 4 seconds.
USINg AND SETTINg THE CLOCK,
THERMOMETER, ALTIMETER, DIgITAL
COMPASS, bAROMETER, CHRONOgRAPH,
ALTIMETER LOg AND ALARM
To view and set any of these features, you must get into the viewing mode
and then the set mode. To enter the viewing mode, press the Fn button for 4
seconds. notice that 2 letters appear in the upper right corner of the display.
These letters may be any of the following, under aBBreVIaTIOn:
To go to the next feature, press the Fn button. To exit this mode, press Fn
for 4 seconds.
These features are described below.
ABBREVIATION
TM
Te
aT
CP
MBar
CH
aTl
al
FEATuRES
Clock
Thermometer
altimeter
Compass
Barometer
Chronograph
altimeter log
alarm
7