Klarstein 10031432 Mode D'emploi page 55

by 10 minutes every 0.5 second. During blinking after setting, press CLOCK button again to confirm the set-
ting, and then  will be constantly displayed.
13 TIMER-OFF button
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button
again. TIMER OFF setting is the same as TIMER ON.
14 TURBO
Press this button to activate / deactivate the Turbo function which enables the unitto reach the preset tem-
perature in the shortest time. In COOL mode, the unit will blow strong cooling air at super high fan speed. In
HEAT mode, the unit will blow strong heating air at super high fan speed.
15 LIGHT button
Press LIGHT button to turn on the display' s light and press this button again to turn off the display' s light. If
the light is turned on,
16 X-FAN
Pressing X-FAN button in COOL or DRY mode,
tinue operation for 2 minutes in order to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
KEY COMBINATIONS
Combination of "+" and "-" buttons: About lock
Press "+" and "-" buttons simultaneously to lock or unlock the keypad. If the remote controller is locked,
is displayed. In this case, pressing any button,
Switch between Fahrenheit and centigrade
At unit OFF, press "MODE" and "-" buttons simultaneously to switch between °C and °F.
Energy-saving Function
Press "TEMP" and "CLOCK" simultaneously in COOL mode to start energy-saving function. Nixie tube on the
remote controller displays "SE". Repeat the operation to quit the function.
55
is displayed. If the light is turned off,
blinks three times.
disappears.
he icon is displayed and the indoor fan will con-
.