Decommissioning - Alpha IP WTHP 61001 Serie Mode D'emploi

Stand-alone operation
1. Pull the device from the frame and the mounting plate (see fig. 5 page 4).
2. Remove the batteries.
3. Re-insert the batteries according to the marking into the battery compartments.
Simultaneously, press and hold the System key for 4 seconds until the LED flashes
rapidly in orange. The display shows "rES".
4. Release the System key.
5. Press the System key again for 4 seconds until the LED lights up in green.
6. Release the System key again.
9 The device restarts.
9 The factory settings are reset.

12 Decommissioning

1. Pull the room control unit Display S Floor Heating from the frame and the mount-
ing plate (see fig. 5 page 4).
2. Remove the batteries from the back of the device.
3. Uninstall the device and dispose of properly.
Decommissioning
57