Sunny SF-B901 Manuel De L'utilisateur page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride during
use, you must ensure that the stability of the bike is correct.
If during use you notice that the bike is unbalanced, you can
adjust the base levelers located beneath the front and rear
bases. To do so, use Spanner (No. 77) to loosen the Nut
(No. 49) by turning it clockwise (direction A). With the nut
loosened, rotate the Base Leveler (No. 16) until it sits level
with the surface that the bike is on. When you have finished
adjusting the base leveler, re-tighten the Nut (No. 49) by
turning it counter-clockwise (direction B) using Spanner (No.
77). If required, repeat this process to adjust the remaining
base levelers.
RESISTANCE AND BRAKING
You may adjust the tension level of the bike by rotating the
Tension Knob (No. 11). To increase the level of resistance,
rotate the tension knob clockwise, to decrease the level of
resistance, rotate the tension knob counter-clockwise.
During exercise, you may stop the bike immediately by
pushing down on the Brake-Handle (No. 9). This is the
emergency brake.
PEDAL STRAP ADJUSTMENT
Your feet should be secured in the toe clips during exercise.
Place your feet as far forward into the toe-clips as you can.
With your feet in place, turn the crank to bring one foot to
within arm's reach, grasp the pedal strap and pull it upward
to tighten the toe-clip cage, then insert the strap back into
the hoop of the toe-clip. Repeat this process to secure your
other foot.
TRANSPORTING THE BIKE
To move the bike, first ensure that the Handlebar (No. 5) is
properly secured. If the handlebar is loose, tighten the Knob
(No. 23) to secure it. Next, stand at the front of the bike so
that you're directly in front of the handlebar. Firmly grasp and
hold each side of the handlebar, place one foot on the front
base and tilt the bike towards you until the transport wheels
on the front base touch the ground. With the wheels on the
ground, you can transport the bike to the desired location
with ease.
NOTE: When moving the bike, always move with caution as
unexpected impact, such as dropping the bike, may cause
injury and affect the bike's operation.
12

Publicité

Table des Matières
loading

Table des Matières