Sunny SF-B901 Manuel De L'utilisateur page 12

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 4:
Loosen and remove 2 Knobs (No. 23). Insert the
Seat Post (No. 2) and Handlebar Post (No. 4)
into the post housing located on the Main Frame
(No. 1). Adjust the Seat Post (No. 2) and
Handlebar Post (No. 4) to the desired positions.
Re-insert and tighten the 2 Knobs (No. 23) to
secure the posts in place.
STEP 5:
NOTE: In order to properly tighten the seat, it is
important to note that you will need two open
faced wrenches (1 for each side) and will need to
tighten the nut on each side simultaneously
working in opposite direction of each other.
Loosen and remove the Knob (No. 23). Next,
insert the Seat Slider (No. 3) into the Seat Post
(No. 2) and adjust it to the desired position. Re-
insert and tighten Knob (No. 23) to secure the
Seat Slider (No. 3) in place.
Attach the Seat (No. 22) to the Seat Slider (No.
3). Tighten and secure with Wrench (No. 75).
Attach the Handlebar (No. 5) to the Handlebar
Post (No. 4) using 2 Hexagon Flat Round Head
Screws (No. 66) and 2 Flat Washers (No. 67),
tighten and secure with Allen Wrench (No. 76).
The assembly is complete!
11