Next Track - Beamz SKYNIGHT Mode D'emploi

Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are present,
and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In the event that the product
must be returned to the factory, it is important that the product be returned in the original factory box and packing.
If the unit has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation
water might damage your unit. Leave the unit switched off until it has reached room temperature.
1. USB input. Note that this projector can automatically recognize and play music while
USB memory is inserted. USB must contain some songs.
2. a. Adjust the brightness of the ocean waves at 3 levels.
b. When power on, LED light and laser light will stay on, short press control LED light
switch, long press control laser light switch.
3. DC input: 5V/2A.
4. Short press to play the previous track, long press to decrease volume.
5. Short press to play the next track, long press to decrease volume.
6. Short press to play or pause music, long press to turn BT on or off.
7. Press button to switch between USB to BT (Connect BT and USB stick at the same
time, then USB stick has music for priority).
8. Power on/off.
1. LED ocean wave light ON/OFF.
2. Laser light ON/OFF.
3. Press "R", red light ON. Press again, red light OFF (at basic of light on at first time)
4. Press "G", green light ON. Press again, green light OFF (at basic of light on at first time).
5. Press "B", blue light ON. Press again, blue light OFF (at basic of light on at first time).
6. Press "W ", white light ON. Press again, white light OFF (at basic of light on at first time).
7. Volume up.
8. Volume down.
9. Previous track

10. Next track

11. Sound to light control: Connect with BT or USB memory playing music, press "MIC" icon,
ocean wave and star light ill respond to the sound of the music.
12. Control ocean wave moving speed up (Pause-Slow-Medium-Fast).
13. Control ocean wave moving speed down (Fast-Medium-Slow-Pause).
14. Long press (3 seconds) to stop timer function.
15. Press "FADE 1" ocean wave move circularly in R-G-B-W single color mode double-color
mode and laser light changed to graduation mode.
(the same features as power On).
16. Press "FADE 2" ocean wave move circularly in RB-RG-RW-BG-BW-GW double-color mode and laser light changed to program mode.
17. Long press (3 seconds) control timing function for 1 hour. When LED, laser light flash and emit "bleep" sound once time as prompting.
One hour later, it'll automatically switch off.
18. Control LED ocean wave light brightness(In order of 70%-40%-40%-70%- 100%).
19. Press "LASER light" for stay on or enter into programm mode.
20. Long press (3 seconds) control timing function for 2 hours. When LED, laser light flash and emit "bleep" sound 2 times as prompting. Two
hours later, it'll automatically switch off.
21. Music Switch On/Off.